TripletLoss T r i p l e t L o s s 的提出,是在这篇论文中——FaceNet: A Unified Embedding for Face Recognition and Clustering,论文中对 TripletLoss T r i p l e t L o s s 的定义如下:
如上图所示, triplet t r i p l e t 是一个三元组,这个三元组是主要构成的:从训练样本中随机选取一个样本,称为 anchor(xa) a n c h o r ( x a ) ,然后再随机分别选取一个和 anchor a n c h o r 类别相同的样本 positive(xp) p o s i t i v e ( x p ) 以及和 anchor a n c h o r 类别不同的样本 negative(xn) n e g a t i v e ( x n ) ,因此构成了[ anchor,positive,negative a n c h o r , p o s i t i v e , n e g a t i v e ]三元组。 TripletLoss T r i p l e t L o s s 的作用就是让特征表达 xa x a 与 xp x p 之间的距离尽可能小,让 xa x a 与 xn x n 的距离尽可能大。
参考博文链接
同时,要让 xa x a 与 xn x n 之间的距离和 xa x a 与 xp之间的距离有一个最小的间隔 x p 之 间 的 距 离 有 一 个 最 小 的 间 隔 α α ,公式化的表示即:
参数:
anchor−−>bottom[0]:N∗C∗1∗1 a n c h o r − − > b o t t o m [ 0 ] : N ∗ C ∗ 1 ∗ 1
positive−−>bottom[1]:N∗C∗1∗1 p o s i t i v e − − > b o t t o m [ 1 ] : N ∗ C ∗ 1 ∗ 1
negative−−>bottom[2]:N∗C∗1∗1 n e g a t i v e − − > b o t t o m [ 2 ] : N ∗ C ∗ 1 ∗ 1
(1)caffe.proto
层参数定义文件位于src/caffe/proto/caffe.proto
optional TripletLossParameter triplet_loss_param = 6667;
message TripletLossParameter {
//margin for negative triplet
optional float margin = 1 [default = 1.0];
}
(2)LayerSetUp
template <typename Dtype>
void TripletLossLayer<Dtype>::LayerSetUp(
const vector<Blob<Dtype>*>& bottom, const vector<Blob<Dtype>*>& top) {
LossLayer<Dtype>::LayerSetUp(bottom, top);
//输入数据维度保持一致
CHECK_EQ(bottom[0]->num(), bottom[1]->num());
CHECK_EQ(bottom[1]->num(), bottom[2]->num());
CHECK_EQ(bottom[0]->channels(), bottom[1]->channels());
CHECK_EQ(bottom[1]->channels(), bottom[2]->channels());
CHECK_EQ(bottom[0]->height(), 1);
CHECK_EQ(bottom[0]->width(), 1);
CHECK_EQ(bottom[1]->height(), 1);
CHECK_EQ(bottom[1]->width(), 1);
CHECK_EQ(bottom[2]->height(), 1);
CHECK_EQ(bottom[2]->width(), 1);
diff_ap_.Reshape(bottom[0]->num(), bottom[0]->channels(), 1, 1);
diff_an_.Reshape(bottom[0]->num(), bottom[0]->channels(), 1, 1);
diff_pn_.Reshape(bottom[0]->num(), bottom[0]->channels(), 1, 1);
diff_sq_ap_.Reshape(bottom[0]->num(), bottom[0]->channels(), 1, 1);
diff_sq_an_.Reshape(bottom[0]->num(), bottom[0]->channels(), 1, 1);
dist_sq_ap_.Reshape(bottom[0]->num(), 1, 1, 1);
dist_sq_an_.Reshape(bottom[0]->num(), 1, 1, 1);
// vector of ones used to sum along channels
summer_vec_.Reshape(bottom[0]->channels(), 1, 1, 1);
for (int i = 0; i < bottom[0]->channels(); ++i)
summer_vec_.mutable_cpu_data()[i] = Dtype(1);
dist_binary_.Reshape(bottom[0]->num(), 1, 1, 1);
for (int i = 0; i < bottom[0]->num(); ++i)
dist_binary_.mutable_cpu_data()[i] = Dtype(1);
}
(3)Forward
template <typename Dtype>
void TripletLossLayer<Dtype>::Forward_cpu(
const vector<Blob<Dtype>*>& bottom,
const vector<Blob<Dtype>*>& top) {
int count = bottom[0]->count();
//const Dtype* sampleW = bottom[3]->cpu_data();
const Dtype sampleW = Dtype(1);
caffe_sub(
count,
bottom[0]->cpu_data(), // anchor
bottom[1]->cpu_data(), // positive
diff_ap_.mutable_cpu_data()); // a_i-p_i
caffe_sub(
count,
bottom[0]->cpu_data(), // anchor
bottom[2]->cpu_data(), // negative
diff_an_.mutable_cpu_data()); // a_i-n_i
caffe_sub(
count,
bottom[1]->cpu_data(), // positive
bottom[2]->cpu_data(), // negative
diff_pn_.mutable_cpu_data()); // p_i-n_i
const int channels = bottom[0]->channels();
Dtype margin = this->layer_param_.triplet_loss_param().margin();//参数\alpha
Dtype loss(0.0);
for (int i = 0; i < bottom[0]->num(); ++i) {
//dist_sq_ap_=diff_ap_.cpu_data*diff_ap_.cpu_data
//即Loss表达式的前半部分
dist_sq_ap_.mutable_cpu_data()[i] = caffe_cpu_dot(channels,
diff_ap_.cpu_data() + (i*channels), diff_ap_.cpu_data() + (i*channels));
//dist_sq_an_=diff_an_.cpu_data*diff_an_.cpu_data
//即Loss表达式的后半部分
dist_sq_an_.mutable_cpu_data()[i] = caffe_cpu_dot(channels,
diff_an_.cpu_data() + (i*channels), diff_an_.cpu_data() + (i*channels));
Dtype mdist = sampleW*std::max(margin + dist_sq_ap_.cpu_data()[i] - dist_sq_an_.cpu_data()[i], Dtype(0.0));//Loss公式
loss += mdist;
if (mdist < Dtype(1e-9)) {
//dist_binary_.mutable_cpu_data()[i] = Dtype(0);
//prepare for backward pass
//对diff_ap_、diff_an_、diff_pn_进行初始化
caffe_set(channels, Dtype(0), diff_ap_.mutable_cpu_data() + (i*channels));
caffe_set(channels, Dtype(0), diff_an_.mutable_cpu_data() + (i*channels));
caffe_set(channels, Dtype(0), diff_pn_.mutable_cpu_data() + (i*channels));
}
}
loss = loss / static_cast<Dtype>(bottom[0]->num()) / Dtype(2);
top[0]->mutable_cpu_data()[0] = loss;//将loss向前传播输出至top
}
(4)Backward
template <typename Dtype>
void TripletLossLayer<Dtype>::Backward_cpu(const vector<Blob<Dtype>*>& top,
const vector<bool>& propagate_down, const vector<Blob<Dtype>*>& bottom) {
//Dtype margin = this->layer_param_.contrastive_loss_param().margin();
//const Dtype* sampleW = bottom[3]->cpu_data();
const Dtype sampleW = Dtype(1);
for (int i = 0; i < 3; ++i) {
//3个输入bottom都需要做反向传播
if (propagate_down[i]) {
const Dtype sign = (i < 2) ? -1 : 1;
const Dtype alpha = sign * top[0]->cpu_diff()[0] /
static_cast<Dtype>(bottom[i]->num());
int num = bottom[i]->num();
int channels = bottom[i]->channels();
for (int j = 0; j < num; ++j) {
Dtype* bout = bottom[i]->mutable_cpu_diff();
if (i == 0) {
//对输入bottom[0]anchor求导
//caffe_cpu_axpby:Y=aX+bY
//diff_pn_=alpha*sampleW*diff_pn_
caffe_cpu_axpby(
channels,
alpha*sampleW,
diff_pn_.cpu_data() + (j*channels),
Dtype(0.0),
bout + (j*channels));
}
else if (i == 1) {
//对输入bottom[1]positive求导
//diff_ap_=alpha*sampleW*diff_ap_
caffe_cpu_axpby(
channels,
alpha*sampleW,
diff_ap_.cpu_data() + (j*channels),
Dtype(0.0),
bout + (j*channels));
}
else if (i == 2) {
// 对输入bottom[2]negative求导
//diff_an_=alpha*sampleW*diff_an_
caffe_cpu_axpby(
channels,
alpha*sampleW,
diff_an_.cpu_data() + (j*channels),
Dtype(0.0),
bout + (j*channels));
}
}
}
}
}
文章浏览阅读645次。这个肯定是末尾的IDAT了,因为IDAT必须要满了才会开始一下个IDAT,这个明显就是末尾的IDAT了。,对应下面的create_head()代码。,对应下面的create_tail()代码。不要考虑爆破,我已经试了一下,太多情况了。题目来源:UNCTF。_攻防世界困难模式攻略图文
文章浏览阅读2.9k次,点赞3次,收藏10次。偶尔会用到,记录、分享。1. 数据库导出1.1 切换到dmdba用户su - dmdba1.2 进入达梦数据库安装路径的bin目录,执行导库操作 导出语句:./dexp cwy_init/[email protected]:5236 file=cwy_init.dmp log=cwy_init_exp.log 注释: cwy_init/init_123..._达梦数据库导入导出
文章浏览阅读1.9k次。1. 在官网上下载KindEditor文件,可以删掉不需要要到的jsp,asp,asp.net和php文件夹。接着把文件夹放到项目文件目录下。2. 修改html文件,在页面引入js文件:<script type="text/javascript" src="./kindeditor/kindeditor-all.js"></script><script type="text/javascript" src="./kindeditor/lang/zh-CN.js"_kindeditor.js
文章浏览阅读2.3k次,点赞6次,收藏14次。SPI的详情简介不必赘述。假设我们通过SPI发送0xAA,我们的数据线就会变为10101010,通过修改不同的内容,即可修改SPI中0和1的持续时间。比如0xF0即为前半周期为高电平,后半周期为低电平的状态。在SPI的通信模式中,CPHA配置会影响该实验,下图展示了不同采样位置的SPI时序图[1]。CPOL = 0,CPHA = 1:CLK空闲状态 = 低电平,数据在下降沿采样,并在上升沿移出CPOL = 0,CPHA = 0:CLK空闲状态 = 低电平,数据在上升沿采样,并在下降沿移出。_stm32g431cbu6
文章浏览阅读1.2k次,点赞2次,收藏8次。数据链路层习题自测问题1.数据链路(即逻辑链路)与链路(即物理链路)有何区别?“电路接通了”与”数据链路接通了”的区别何在?2.数据链路层中的链路控制包括哪些功能?试讨论数据链路层做成可靠的链路层有哪些优点和缺点。3.网络适配器的作用是什么?网络适配器工作在哪一层?4.数据链路层的三个基本问题(帧定界、透明传输和差错检测)为什么都必须加以解决?5.如果在数据链路层不进行帧定界,会发生什么问题?6.PPP协议的主要特点是什么?为什么PPP不使用帧的编号?PPP适用于什么情况?为什么PPP协议不_接收方收到链路层数据后,使用crc检验后,余数为0,说明链路层的传输时可靠传输
文章浏览阅读587次。软件测试工程师移民加拿大 无证移民,未受过软件工程师的教育(第1部分) (Undocumented Immigrant With No Education to Software Engineer(Part 1))Before I start, I want you to please bear with me on the way I write, I have very little gen...
文章浏览阅读304次。Thinkpad X250笔记本电脑,装的是FreeBSD,进入BIOS修改虚拟化配置(其后可能是误设置了安全开机),保存退出后系统无法启动,显示:secure boot failed ,把自己惊出一身冷汗,因为这台笔记本刚好还没开始做备份.....根据错误提示,到bios里面去找相关配置,在Security里面找到了Secure Boot选项,发现果然被设置为Enabled,将其修改为Disabled ,再开机,终于正常启动了。_安装完系统提示secureboot failure
文章浏览阅读10w+次,点赞93次,收藏352次。1、用strtok函数进行字符串分割原型: char *strtok(char *str, const char *delim);功能:分解字符串为一组字符串。参数说明:str为要分解的字符串,delim为分隔符字符串。返回值:从str开头开始的一个个被分割的串。当没有被分割的串时则返回NULL。其它:strtok函数线程不安全,可以使用strtok_r替代。示例://借助strtok实现split#include <string.h>#include <stdio.h&_c++ 字符串分割
文章浏览阅读2.3k次。1 .高斯日记 大数学家高斯有个好习惯:无论如何都要记日记。他的日记有个与众不同的地方,他从不注明年月日,而是用一个整数代替,比如:4210后来人们知道,那个整数就是日期,它表示那一天是高斯出生后的第几天。这或许也是个好习惯,它时时刻刻提醒着主人:日子又过去一天,还有多少时光可以用于浪费呢?高斯出生于:1777年4月30日。在高斯发现的一个重要定理的日记_2013年第四届c a组蓝桥杯省赛真题解答
文章浏览阅读851次,点赞17次,收藏22次。摘要:本文利用供需算法对核极限学习机(KELM)进行优化,并用于分类。
文章浏览阅读1.1k次。一、系统弱密码登录1、在kali上执行命令行telnet 192.168.26.1292、Login和password都输入msfadmin3、登录成功,进入系统4、测试如下:二、MySQL弱密码登录:1、在kali上执行mysql –h 192.168.26.129 –u root2、登录成功,进入MySQL系统3、测试效果:三、PostgreSQL弱密码登录1、在Kali上执行psql -h 192.168.26.129 –U post..._metasploitable2怎么进入
文章浏览阅读257次。本文将为初学者提供Python学习的详细指南,从Python的历史、基础语法和数据类型到面向对象编程、模块和库的使用。通过本文,您将能够掌握Python编程的核心概念,为今后的编程学习和实践打下坚实基础。_python人工智能开发从入门到精通pdf