技术标签: RDMA
目录
原文:https://www.rdmamojo.com/2013/02/15/ibv_poll_cq/ (强烈建议去看原文)
ibv_poll_cq()从完成队列(CQ)轮询WC(工作完成),非阻塞函数。
[工作完成] 表示 WQ(工作队列)中的WR(工作请求) 以及与CQ相关联的所有已发布到该工作队列的未发出信号的WR(工作请求)均已完成。
(A Work Completion indicates that a Work Request in a Work Queue, and all of the outstanding unsignaled Work Requests that posted to that Work Queue, associated with the CQ are done.)
任何发送和接收请求 以及以错误结束的发送请求,将在处理结束后生成WC(工作完成)。
(Any Receive Requests, signaled Send Requests and Send Requests that ended with an error will generate a Work Completion after their processing end.)
当[工作请求]结束时,会将[工作完成]添加到与此工作队列相关联的CQ的尾部。 ibv_poll_cq()检查CQ中是否存在[工作完成],并按其输入顺序从CQ的顶部弹出(FIFO)。从CQ弹出[工作完成]后,无法将其返回给CQ。
应该以比产生WC更快的速度消费CQ中的WC,防止CQ队列溢出,如果发生CQ溢出,将触发异步事件IBV_EVENT_CQ_ERR,并且无法再使用CQ。
Name | Direction | Description |
---|---|---|
cq | in | 从ibv_create_cq()返回的CQ |
num_entries | in | 期望从CQ读取的WC数 |
wc | out | 从CQ读取的WC数num_entries的数组。(Array of size num_entries of the Work Completions that will be read from the CQ) |
结构ibv_wc描述了wc的属性。
struct ibv_wc {
uint64_t wr_id;
enum ibv_wc_status status;
enum ibv_wc_opcode opcode;
uint32_t vendor_err;
uint32_t byte_len;
uint32_t imm_data;
uint32_t qp_num;
uint32_t src_qp;
int wc_flags;
uint16_t pkey_index;
uint16_t slid;
uint8_t sl;
uint8_t dlid_path_bits;
};
这是struct ibv_wc的完整说明:
wr_id | 与WR对应关联的64 bit值 (The 64 bits value that was associated with the corresponding Work Request) |
status | Status of the operation. The value can be one of the following enumerated values and their numeric value: 操作状态。该值可以是下列枚举值及其数字值之一:
|
opcode | The operation that the corresponding Work Request performed. This value controls the way that data was sent, the direction of the data flow and the valid attributes in the Work Completion. The value can be one of the following enumerated values: 相应的工作请求执行的操作。此值控制数据的发送方式、数据流的方向以及“工作完成”中的有效属性。该值可以是下列枚举值之一:
|
vendor_err | 供应商特定的错误,如果completion 因错误而结束,则会提供更多信息。一旦WC以错误结束,该值向RDMA设备的供应商提供有关失败原因的提示。 |
byte_len | 传输的字节数。与incoming Send或 RDMA Write with immediate operations的接收队列有关。该值不包括立即数的长度(如果存在)。与RDMA读取和原子操作的“发送队列”相关。对于不与SRQ关联的UD QP的接收队列,或者对于与UD QP关联的SRQ,该值等于消息的有效负载加上为GRH保留的40个字节。传输的字节数是消息的有效负载加上为GRH保留的40个字节(无论是否存在GRH) (The number of bytes transferred. Relevant if the Receive Queue for incoming Send or RDMA Write with immediate operations. This value doesn't include the length of the immediate data, if such exists. Relevant in the Send Queue for RDMA Read and Atomic operations.For the Receive Queue of a UD QP that is not associated with an SRQ or for an SRQ that is associated with a UD QP this value equals to the payload of the message plus the 40 bytes reserved for the GRH.The number of bytes transferred is the payload of the message plus the 40 bytes reserved for the GRH, whether or not the GRH is present) |
imm_data | (可选)以网络顺序的SEND或RDMA WRITE操作码中的32 bit 数字,与有效载荷一起发送到远程端,并放置在[接收工作完]( Receive Work Completion)成中,而不是在远端内存缓冲区中。如果设置了IBV_WC_WITH_IMM,则此值有效 |
qp_num | 已完成的WR的本地QP的号码。与和SRQ相关的[接收工作完成](Receive Work Completions)相关. (Local QP number of completed WR. Relevant for Receive Work Completions that are associated with an SRQ) |
src_qp | Source QP number (remote QP number) of completed WR. Relevant for Receive Work Completions of a UD QP |
wc_flags | Flags of the Work Completion. It is either 0 or the bitwise OR of one or more of the following flags:
|
pkey_index | P_Key index. Relevant for GSI QPs |
slid | Source LID (the base LID that this message was sent from). Relevant for Receive Work Completions of a UD QP |
sl | Service Level (the SL LID that this message was sent with). Relevant for Receive Work Completions of a UD QP |
dlid_path_bits | Destination LID path bits. Relevant for Receive Work Completions of a UD QP (not applicable for multicast messages) |
以下测试(opcode & IBV_WC_RECV)将指示 来自接收队列的完成状态。(The following test (opcode & IBV_WC_RECV) will indicate that the status of a completion is from the Receive Queue.)
对于UD QP的[接收工作完成](receive Work Completions),无论是否设置了IBV_WC_GRH位,数据均从已发布的接收缓冲区的偏移量40开始。
并非所有wc属性始终有效。如果完成状态不是IBV_WC_SUCCESS,则仅以下属性有效:
Value | Description |
---|---|
正数 | 从CQ读取的WC数及其值在wc中返回。如果该值小于num_entries,则表示CQ中没有更多的工作完成。如果此值等于num_entries,则CQ中可能会有更多的工作完成 |
0 | CQ为空 |
负数 | 尝试从CQ读取WC(工作完成)时发生故障 |
从CQ轮询WC(工作完成)(在轮询模式下):
struct ibv_wc wc;
int num_comp;
do {
num_comp = ibv_poll_cq(cq, 1, &wc);
} while (num_comp == 0);
if (num_comp < 0) {
fprintf(stderr, "ibv_poll_cq() failed\n");
return -1;
}
/* verify the completion status */
if (wc.status != IBV_WC_SUCCESS) {
fprintf(stderr, "Failed status %s (%d) for wr_id %d\n",
ibv_wc_status_str(wc.status),
wc.status, (int)wc.wr_id);
return -1;
}
那工作完成(WC)到底是什么?
工作完成意味着相应的工作请求已结束,缓冲区可以(重新)用于读取,写入或释放。
ibv_poll_cq()是否引起上下文切换?
否。Work Completions的轮询根本不会导致上下文切换;它不会导致上下文切换。这就是为什么RDMA技术可以实现极低的延迟(低于1 usc)的原因。
Is there a limit to the number of Work Completions that can we polled when calling ibv_poll_cq()?
调用ibv_poll_cq()时可以轮询的[工作完成](Work Completions 数量是否有限制?
没有,你想读多少都行。
我调用了ibv_poll_cq(),它填充了我提供给它的所有数组。我能否知道CQ中还有多少工作完成?
不,你不能。
我从UD QP的接收队列中获得了工作完成(WC),并且进展顺利。我从内存缓冲区中读取了数据,但数据不正确。为什么?
也许您查看了数据的起始偏移量0。对于UD QP的任何工作完成,无论是否存在GRH,数据都将放置在相关内存缓冲区的偏移量40中。
什么是GRH,为什么我需要它?
全局路由头(GRH)提供的信息对于将消息发回给此消息的发件人(如果来自其他子网或来自多播组)最有用。
I've got completion with error status. Can I read all of the Work Completion fields?
否。如果“工作完成”状态表明存在错误,则仅以下属性有效:wr_id,status,qp_num和vendor_err。其余属性未定义。
我从CQ上Read了一个WC,但我不需要,我可以将其退还给CQ吗?
不,你不能。
我可以阅读属于特定工作队列的工作完成吗?(Can I read Work Completion that belongs to a specific Work Queue?)
不,你不能。
如果添加的工作完成(WC)数量超过CQ的size,将会发生什么情况?
CQ将超限,并且CQ(以及与之关联的所有QP)将进入错误状态。
文章浏览阅读256次。本文由 @小刘先森 原创,转载请注明出处。使用PL/pgSQL也有比较久的时间了,写几篇从入门开始学习的文章,方便小伙伴们学习。PL/pgSQL从入门到放弃(1)-入门PL/pgSQL从入门到放弃(2)-变量定义与数据类型PL/pgSQL从入门到放弃(3)-函数PL/pgSQL从入门到放弃(4)-控制结构PL/pgSQL从入门到放弃(5)-游标声明变量上一篇介绍到,PL/pgSQL是块结构的语言。..._plsql实数
文章浏览阅读115次。c++ - Warning C4251 when building a DLL that exports a class containing an ATL::CString member - Stack Overflow_warning c4251
文章浏览阅读1.8k次。点击下方卡片,关注“CVer”公众号AI/CV重磅干货,第一时间送达本文转载自:机器之心1980 年,福岛邦彦首次使用卷积神经网络实现了模式识别,他被认为是真正的卷积神经网络发明者。近日,..._卷积 彦
文章浏览阅读167次。C语言 预处理指令和宏定义_c#宏定义和预处理指令
文章浏览阅读2.4w次,点赞2次,收藏18次。问题描述 在客户局点为接入层设备S5700-52P-LI-AC做预配置,配置完成后客户要求修改维护账号huawei的密码为该局点专用密码。修改前AAA下配置如下: aaa authentication-scheme default authorization-scheme default accountin..._华为s1730s交换机重置密码失败怎么办
文章浏览阅读1.7k次。今天聊一聊这支火遍国内外的老蛙24mm F14 2X Macro Probe视频作者:苏科大物理实验(bilibili)以下为图文版,看视频不方便的朋友可以先看看图文!细长的结构,24mm的视角,两倍的微距,老蛙探针式微距镜头可以呈现独特的视觉体验。细长的镜头结构由三部分组成,物镜组、接力镜头组和微距放大镜头组。被拍摄物体经过三组镜头三次成像,最终呈现在相机的感光元件上。第一部分,物镜组..._探针镜头原理
文章浏览阅读905次,点赞18次,收藏13次。脏读,就是读到了其他会话还没有提交的修改。下面用例子说明:可以看到,会话 2 修改了 id 为 222 的用户,在还没提交或回滚事务之前,会话 1 就读到了这些改动。脏读的本质就是,还没结束的写操作被读操作分割了。所以,为了解决脏读,就必须让写操作不可被读操作分割(当然,也不能被其他写操作分割),即保证所谓的原子性。不可重复读,就是在同一个事务中,多次读相同的记录但读到了不同的结果。
文章浏览阅读3.9k次。1.下载最新的eclipse javaee版本,下载地址为:http://www.eclipse.org/downloads/,这里注意一定要选择javaee版本,2.Tomcat下载,链接为:http://tomcat.apache.org/3.下载eclipse tomcat插件,下载地址为:http://download.csdn.net/detail/longsheng_eclipse javaee 编译 发布
文章浏览阅读341次,点赞8次,收藏6次。
文章浏览阅读214次。团簇是由多个分子或原子聚集在一起的微观结构,研究团簇的全局最优结构(即能量最低)对于发现新型材料的结构和性能具有重要意义。传统的理论研究方法存在计算时间长、计算效果差等问题,而机器学习作为一个极具前景的多学科交叉领域,能够有效提高模型学习与计算的效率。因此本文针对三维团簇的能量预测和结构寻优问题,采用了多种机器学习方法进行研究。最后,我们对模型进行了灵敏度分析不断改变学习因子的数值,发现模型预测出的能量值波动幅度较低,具有较强的稳定性,证明了建立模型的可靠性、有效性及鲁棒性,
文章浏览阅读676次,点赞8次,收藏10次。学习网站:https://www.runoob.com/html/html-tutorial.html。
文章浏览阅读109次。行动导 向教学在高职 《语言程序设计》中的应用初探袁开友 姚骏屏(重庆正大软件职业技术学院 )摘 要 高等职业教育强调培 养 高技能型人 才, 语 言 导学 习”再到 “自主学 习完 成任务”的转变 。充分体现 了 “以程序 设 计 》是 计 算机 、软件 开发 等 专业 的 高职 学生 的技 能基 学生 为主体 ,以学 生为 中心 ”的原则,可有 效地 提高学生 的动础 ,在 本课教 学 实践 ..._程序设计 行动导向